RM44100/ i  

Hummel 10 tonne tandem axle

This trailer is constructed in Turkey to our specifications, for NZ conditions. A 1 metre hay extension and tail rack is provided with this trailer. 10 tonne double axle dropside tipping trailer manufactured in Turkey to European standards and specially constructed at the factory for NZ conditions. All the “extras” provided by other manufacturers are included with this trailer! Check the specifications and compare the value for money that this trailer offers. 

Factory fitted extras include the following: 

  • Hydraulic brakes on all four wheels

  • Hand brake

  • Wheel chocks to totally secure the trailer on a slope

  • Swivel tow eye

  • Safety chain mounting plates

  • Deck support brace to keep deck safely raised

  • Lights that are fully guarded and inside a channel

  • Hydraulic double acting towbar jack to adjust drawbar height for connecting

  • Tow hitch at the rear for a second trailer or pulling anything else

  • Tool box for holding load straps, chains etc

  • Water container and soap dispenser for hand washing when necessary

  • Tail board is swung high to ensure ease of tipping bulky loads

  • Drawbar pipe stand to keep hydraulic hoses away from tractor wheels

  • Automatic opening of tailboard at 15 degrees elevation

  • Strong pipe under the tipping body for securing tie down straps

  • Spreading chains fitted 

  • Folding step on the front to enable easy access to the trailer

  • The sides are two piece units on each side that fold down easily to create a flat deck trailer for carting bales or fertilizer or pallets 

  • Model: RM44100/i

Specifications: 

Empty weight 2200kgs

Load capacity 10,000kgs

Total allowable weight 12,000kgs

Load volume approx 5.63m3

Load space 9.4m2

Body length 4270mm

Body width 2200mm

Side height 600mm

Side thickness 2mm

Floor thickness 4mm

Deck height from ground 980mm

Suspension Parabolic system

Wheel track 1800mm

Wheels and tyres 400/60-15.5  (14 ply tyres x 4)

Brakes Hydraulic on all four wheels

Tipping angle 53 degrees

Paint process-Chassis is coated with acrylic paint. All sides powder coated 

Viewing and a demonstration is welcomed. Email or call for a quote.